Weltool T8/ T8Plus LED Flashlights 2100 Lumen Ultra Bright LED Flashlight USB Led Torch
|Light Output||6 lumens||20 lumens||1,000 lumens||470 lumens||600 lumens||215 lumens||2,100 lumens||810 lumens|
|Beam Intensity||300 cd||850 cd||44,000 cd||19,000 cd||24,000 cd||8,250 cd||94,000 cd||33,125 cd|
Aluminum alloy material, surface hard anodizedAllminum alloy reflector, coated tempered glass lensAdopt high power white light X-LED, color temperature 6500-6800K
Color #01 is Weltool T8, adapt 18650 battery or 2 CR123A; Color #02 is Weltool T8plus, adapt 21700 battery(Package not incluced battery)
1 x Flashlights
(Not incluced battery)
First install the battery correctly, this flashlight has a polarity protection function, even if you install the battery in the wrong direction, the flashlight will not be damaged, but it will not light up, please check the battery in time at this time
After installing the battery, lightly press the tail switch button once to turn on the flashlight and release it to turn off. Immediately press the tail switch again to switch to the next mode; press this operation repeatedly to cycle in low-high-medium-full power; at this time, press the ‘click’ sound in any mode to lock the current mode and keep on, and again The flashlight can be turned off by pressing firmly on the switch with a ‘click’ sound.In the power-off state, tap the tail more than four times in quick succession to turn on the 12Hz Strobe, and press hard to lock the Strobe continuously.During use, when the battery power drops, the flashlight light will flash, please charge the battery in time. When the battery is exhausted, the flashlight will automatically stop working.
1. Do not disassemble the parts by yourself, this will void the warranty and may damage the flashlight.
2. It is normal for the flashlight to heat up during use; however, the full power mode cannot work continuously for a long time. When the hand feels too hot, please switch to a lower mode in time to ensure that it will not burn.
3. At full power output, it will quickly consume power and accelerate the temperature rise. The flashlight has been set to automatically reduce the output protection function after 1 minute.
4. After long-term use, the O-ring and waterproof ring of the flashlight may deteriorate. Please replace it in time to maintain the waterproof performance of the flashlight.
5. After long-term use, the grease on the thread at the tail of the flashlight will be reduced. In order to keep the thread smooth, please use professional grease to lubricate the thread in time.
6. Please clean the conductive contact surface of the flashlight in time to ensure the normal operation of the flashlight, especially when the flashlight flashes abnormally or fails to light up, it may be caused by stains on the contact surface. Try to clean the conductive contact surface with an alcohol swab.
7. This is not a diving flashlight
8. This is not a toy please keep away from children
9. Do not try to shoot in the eyes or skin