DC5-24V bluetooth Smart APP Control Magic Color Controller for 2811 2812 LED Pixel Strip Light

SKU: LUST-1314351


Dispatch:Usually will be shipped in 24 hours
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Shipping Fast to Chat with us online to see if the product is in stock before order:
WhatsApp us

Working voltage:DC5-24V
Working current:20mA~130mA
Working temperature:-20??~60??
Remote distance:30 meters
Product size:85mm*45mm*22mm
1. Long distance APP remote control via WIFI;
2. Support routing mode(AP) and LAN connection mode(STA);
3. Support almost every kind of one-wire or two-wire LED driver IC ;
4. Brightness adjustable, With 180 kinds of patterns and 8 kind of color adjustable patterns;
5.Creatively using from-image-to-effect method for user to DIY any effect;
6. Support setting pixel number and segments number, able to control up to 2048 pixels;
5. DC5V~12V wide range working voltage, preventing reverse connection of power supply;
6. User setting saving;
App control
Both IOS version and Android OS version are available. (hardware should support WIFI)
Requires IOS version 10.0 or later;
Requires Android version 4.4 or later;
SearchLEDHuein App or Google pay or scan this QR code to download and install the App
Working mode and connecting
AP(Access Point) mode
Controller and Phone connect directly, controller works as an access point.
Connect steps
1.When the device is not connected to any WIFI network, power on the controller and wait for 20s and then controller will switch into AP mode ;
2.In the WIFI setting page, find and connect the controller(named like SP108E_xxx, the default pin code is 12345678),
3.Open the LED Shop App, then the controller will be showed on the device list;
STA(Station) mode
Controller and phone are in one same WIFI network, in this network, users can operate the controller smoothly.
Connect steps
1. When the device is not connected to any WIFI network,power on the controller, controller will be remain in Wait-For-Connet mode for 20 seconds;
2. Make sure that your phone is connected to a WIFI network, Open LED Shop APP, pressing the Add Device button,
input the WIFI pin code, then press the OK to confirm and wait for the configure processing finish;
3. When controller successfully enter the WIFI network, it will be showed on the device list;
4. User can select the controller and remove it out of the network by pressing the Remove Device button, then the controller will switch into AP mode.
Package included
1 * bluetooth led controller

Weight 0.022 kg


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Customers Also Viewed