XS-007C US Plug 6W 100V-240V Dual Mode LED infrared Sensor Night Light Warm Light/White Light

Specification
Model:XS-007C
Voltage:100-240V 50Hz/60Hz, constant-current drive
Lamp power:6.0W
Standby Power
Color Temperature:White Light 6000-6500K, Warm Light:2700-3200K
Induction Light Source:2835 lamp beads:12pcs, 0.5W/pc
LED Lumen:55-60LM/pc
Whole Lamp Lumen:400-500LM
Sensing Angle:about 90∥
Sensing Distance:4-5 meters
Size:66X201mm
Light Sensor:Equipped with photo-sensitive sensor, if the illumination is more than 15 Lux, the sensor lamp will not turn on the lighting. Higher than 20 Lux, the light will be turned off automatically.
Material:PC plastic (lamp body) + light diffusion PC plastic (lamp shade)
Features
1) Infrared induction principle is to receive infrared energy from the human body through an infrared sensor, compare it, send a signal to the processor, and then start the lighting. When the person leaves, the lighting will continue until the set time, then the lighting will stop or enter low power lighting.
2) The induction lamp is set with two induction modes:I. Infrared induction light ON/OFF. II. Infrared induction light dim/bright.
Function I and II can be automatically switched by the toggle switch to adapt to different places.
3) Function
A. When the switch is in the I position, when the light is dim (below 15 LUX). When a person is moving within the detection range, the IR sensor light will automatically turn on at full power. When a person leaves, the light will remain illuminated for 30 seconds and then turn off automatically. When the light is above 15 LUX, the light is not sensed.
B. When the switch is in position II, when the light is dimmed (below 15 LUX). When a person moves within the detection range, the IR sensor light automatically turns on at full power. When a person leaves, the light will continue to illuminate for 30 seconds and then automatically switch to low light, low light power:0.5-0.8W. When the light is above 15 LUX, the light is not sensed. When the light is higher than 15 LUX, the light will not be switched on, but when the light is higher than 20 LUX, the light will be switched off automatically.
4) Application:the product is easy to install, has the characteristics of energy saving, long life, no radiation, environmental protection, explosion-proof, etc.. Widely used in corridor, corridor, garage, closet, bathroom, kitchen, basement and other places of automatic lighting.
Caution
– Working temperature in -10￥~+35￥ environment.
– Do not install in places where airflow changes and temperature changes are large (such as near windows, air conditioners, stoves, etc.).
– Stay more than 3 meters away from high power (100W or more) or high interference lamps.
– Adjust its angle when installing to ensure sensitive sensing.
– Do not install in bathrooms, steam rooms or other places where there is water mist or water spray.
Package Included
1 x Lamp with US Plug