Wireless Remote Control Switch Relay Control Board 433.92MHz Lamp Light Smart Home

SKU: LUST-1694702

$13

Dispatch:Usually will be shipped in 24 hours
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Shipping Fast to Chat with us online to see if the product is in stock before order:
WhatsApp us

The Remote control Specification
Model Number:KR2201D
RF Frequency:433.92Mhz.
Input Voltage:AC 90V-250V.
Modulation Mode:ASK.
Receiver Sensitivity:-108 dbm.
RF Working Mode:Superheterodyne Reception.
Remote Control Range:100 Meters (Open Space).
Support Storing The Quantity Of Remote Control:32 PCS.
Support The Type Of Remote Control:Learning Code(1527), Fixed Code(2262).
Working Mode:Momentary, Toggle and Latching.
Wiring Connection Way:Fixed Wiring Pillar.
Package Weight:50g/1.76oz
Note
This Product NO WIFI Function. Only RF 433.92Mhz Function
How to install this smart switch
You don’t need to open the outer casing of this smart switch
You can wire directly to the terminal block
Please note:Please turn off the power before wiring.
Please connect the wires according to the following diagram
Operation Introduction
About Working Mode
Learning The Code (momentary)
Press the learning key once, the LED on the Receiver will flash once.
When the LED switches on, press any button on the remote control, the LED on the Receiver will flash 3 times and switches off.
Indicates that they are successfully paired.
Learning The Code (Toggle)
Press the learning key twice, the LED on the receiver will flash twice.
When the LED switch on, press any button on the remote control, the LED on the Receiver will flash 3 times and switches off.
Indicates that they are successfully paired.
Learning The Code (Latching)
Notes:Latching mode require 2 different buttons, the first one for ‘ON’, the second one for ‘OFF’.
For example:button A = ON, button B = OFF.
Push the learning key on the receiver 3 times, initiate latching mode setting.
Wait for a moment, the LED indicator on the receiver will flash briefly and switches off.
Push the remote button A, LED flashes 5 times.
Push the remote button B. LED flashes 5 times.
3 seconds later, the LED indicator will switch on again, indicates that the remote control and the receiver are successfully paired.
A = ON, B = OFF.
Receiver Code Resetting/Clearing
Push the learning button on the receivers 8 times, the codes will be cleared. After clearing the code, all the remote controls need to be re-paired in order to control the receiver again. Re
Recommended switch, please click HERE.
Package included
1 x Remote control (not included the switch)

Weight 0.054 kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Customers Also Viewed